Venturi Wet Dust Collector (EWSC Series)

Product Overview

The EWSC Series Venturi Wet Dust Collector is mature wet dust removal equipment with stable and reliable performance and convenient daily maintenance. This unit is composed of Venturi tube and mist eliminator. The Venturi tube acts as the pretreatment module. Waste gas accelerates sharply through the Venturi throat, realizing full mixing of dust and washing liquid to capture particulate pollutants initially. Then the gas enters the mist eliminator for secondary separation.

In the mist eliminator, strong rotational airflow creates centrifugal force. Soot and ash droplets are thrown onto the inner wall, captured by the continuous water film, and flow into the bottom ash hopper together with wastewater. It is widely applied for high-concentration dusty flue gas treatment in various industrial scenarios.

Working Principle

1. Dust-laden gas passes through the Venturi tube, forming high-speed airflow; washing liquid is atomized fully to collide and capture dust particles.

2. The gas mixture flows into the mist eliminator and produces violent rotation.

3. Centrifugal force pushes soot and ash droplets onto the equipment wall.

4. Pollutants stick to the water film on the wall and flow down into the ash hopper for discharge.

5. Clean gas is exhausted from the top outlet after separation.

Key Advantages

• Simple mechanical structure, stable operation, low failure rate
• Easy inspection and maintenance, low operating cost
• High efficiency for capturing medium and coarse dust particles
• Capable of simultaneous dust removal and waste gas absorption
• Support customized size and processing air volume
• Optional carbon steel, stainless steel and anti-corrosion coating

Technical Parameters

Application Scenarios

• Metallurgical furnace flue gas dust removal
• Foundry and casting workshop waste gas treatment
• Building material kiln flue gas purification
• Chemical industry dust and waste gas treatment
• Waste incineration auxiliary flue gas cleaning

Order Instructions

• Provide waste gas flow rate, temperature, dust concentration and particle size
• Inform corrosive components in flue gas for material selection
• Offer installation space limits, inlet and outlet size requirements
• Customized structural dimensions are available

SEO Brief: EWSC Series Venturi Wet Dust Collector adopts Venturi pretreatment and centrifugal separation, reliable for industrial flue gas dust removal. Simple structure, easy maintenance, customized air volume and anti-corrosion materials available.